|
| int | et_event_new (et_sys_id id, et_att_id att, et_event **pe, int mode, struct timespec *deltatime, size_t size) |
| | This routine is called when a user wants a blank or fresh event from the ET system into which data can be placed. More...
|
| |
| int | et_events_new (et_sys_id id, et_att_id att, et_event *pe[], int mode, struct timespec *deltatime, size_t size, int num, int *nread) |
| | This routine is called when a user wants an array of blank or fresh events from the ET system into which data can be placed. More...
|
| |
| int | et_event_new_group (et_sys_id id, et_att_id att, et_event **pe, int mode, struct timespec *deltatime, size_t size, int group) |
| | This routine is called when a user wants a blank or fresh event from the ET system into which it can place data and that event must belong to the given group. More...
|
| |
| int | et_events_new_group (et_sys_id id, et_att_id att, et_event *pe[], int mode, struct timespec *deltatime, size_t size, int num, int group, int *nread) |
| | This routine is called when a user wants an array of blank or fresh event from the ET system into which it can place data and those events must belong to the given group. More...
|
| |
| int | et_event_get (et_sys_id id, et_att_id att, et_event **pe, int mode, struct timespec *deltatime) |
| | This routine is called when a user wants to read a single event from the ET system. More...
|
| |
| int | et_events_get (et_sys_id id, et_att_id att, et_event *pe[], int mode, struct timespec *deltatime, int num, int *nread) |
| | This routine is called when a user wants to read an array of events from the ET system. More...
|
| |
| int | et_event_put (et_sys_id id, et_att_id att, et_event *pe) |
| | This routine is called when a user wants to return a single, previously read or new event into the ET system so processes downstream can use it or so it can be returned to ET_GRANDCENTRAL station. More...
|
| |
| int | et_events_put (et_sys_id id, et_att_id att, et_event *pe[], int num) |
| | This routine is called when a user wants to return an array of previously read or new events into the ET system so processes downstream can use it or so it can be returned to ET_GRANDCENTRAL station. More...
|
| |
| int | et_event_dump (et_sys_id id, et_att_id att, et_event *pe) |
| | This routine is called when a user wants to get rid of a single, previously read or new event so that no user processes downstream will ever see it. More...
|
| |
| int | et_events_dump (et_sys_id id, et_att_id att, et_event *pe[], int num) |
| | This routine is called when a user wants to get rid of an array of previously read or new events so that no user processes downstream will ever see them. More...
|
| |
| int | et_event_getgroup (et_event *pe, int *grp) |
| | This routine gets the group number that the event is associated with. More...
|
| |
| int | et_event_setpriority (et_event *pe, int pri) |
| | This routine sets the priority of an event to either ET_LOW which is the default or ET_HIGH. More...
|
| |
| int | et_event_getpriority (et_event *pe, int *pri) |
| | This routine gets the priority of an event, either ET_LOW or ET_HIGH. More...
|
| |
| int | et_event_setlength (et_event *pe, size_t len) |
| | This routine sets the length of an event's data in bytes. More...
|
| |
| int | et_event_getlength (et_event *pe, size_t *len) |
| | This routine gets the length of an event's data in bytes. More...
|
| |
| int | et_event_setcontrol (et_event *pe, int con[], int num) |
| | This routine sets the control array of an event. More...
|
| |
| int | et_event_getcontrol (et_event *pe, int con[]) |
| | This routine gets the control array of an event. More...
|
| |
| int | et_event_setdatastatus (et_event *pe, int datastatus) |
| | This routine sets an event's data status. More...
|
| |
| int | et_event_getdatastatus (et_event *pe, int *datastatus) |
| | This routine gets an event's data status. More...
|
| |
| int | et_event_setendian (et_event *pe, int endian) |
| | This routine sets an event's data endian value. More...
|
| |
| int | et_event_getendian (et_event *pe, int *endian) |
| | This routine gets an event's data endian value. More...
|
| |
| int | et_event_getdata (et_event *pe, void **data) |
| | This routine gets the pointer to an event's data. More...
|
| |
| int | et_event_setdatabuffer (et_sys_id id, et_event *pe, void *data) |
| | This routine set an event's data buffer for a remote user. More...
|
| |
| int | et_event_needtoswap (et_event *pe, int *swap) |
| | This routine indicates whether an event's data needs to be swapped or not. More...
|
| |
| int | et_open (et_sys_id *id, const char *filename, et_openconfig openconfig) |
| | This routine opens an ET system for client use. More...
|
| |
| int | et_close (et_sys_id id) |
| | This routine closes an open ET system. More...
|
| |
| int | et_forcedclose (et_sys_id id) |
| | This routine closes an open ET system but differs from et_close in that it automatically closes all attachments. More...
|
| |
| int | et_kill (et_sys_id id) |
| | This routine kills an open ET system. More...
|
| |
| int | et_system_start (et_sys_id *id, et_sysconfig sconfig) |
| | This routine creates an ET system. More...
|
| |
| int | et_system_close (et_sys_id id) |
| | This routine closes or shuts down an ET system. More...
|
| |
| int | et_alive (et_sys_id id) |
| | This routine tells if an open ET system is alive (heartbeat is going). More...
|
| |
| int | et_wait_for_alive (et_sys_id id) |
| | This routine waits until given ET system is alive. More...
|
| |
| char * | et_perror (int err) |
| | This routine returns a string describing the given error condition. More...
|
| |
| int | et_wakeup_attachment (et_sys_id id, et_att_id att) |
| | This routine wakes up a specific attachment waiting to read events. More...
|
| |
| int | et_wakeup_all (et_sys_id id, et_stat_id stat_id) |
| | This routine wakes up all attachments waiting to read events on a station. More...
|
| |
| int | et_attach_geteventsput (et_sys_id id, et_att_id att_id, uint64_t *events) |
| | This routine gets the number of events an attachment put by calling et_event_put or et_events_put. More...
|
| |
| int | et_attach_geteventsget (et_sys_id id, et_att_id att_id, uint64_t *events) |
| | This routine gets the number of events an attachment obtained by calling et_event_get, or et_events_get. More...
|
| |
| int | et_attach_geteventsdump (et_sys_id id, et_att_id att_id, uint64_t *events) |
| | This routine gets the number of events an attachment dumped by calling et_event_dump, or et_events_dump. More...
|
| |
| int | et_attach_geteventsmake (et_sys_id id, et_att_id att_id, uint64_t *events) |
| | This routine gets the number of events an attachment created by calling et_event_new, et_events_new, et_event_new_group, or et_events_new_group. More...
|
| |
| int | et_station_create_at (et_sys_id id, et_stat_id *stat_id, const char *stat_name, et_statconfig sconfig, int position, int parallelposition) |
| | This routine creates a station provided that it does not already exist and the maximum number of stations has not been reached. More...
|
| |
| int | et_station_create (et_sys_id id, et_stat_id *stat_id, const char *stat_name, et_statconfig sconfig) |
| | This routine creates a station provided that it does not already exist and the maximum number of stations has not been reached. More...
|
| |
| int | et_station_remove (et_sys_id id, et_stat_id stat_id) |
| | This routine deletes a station provided it is not GRAND_CENTRAL and provided there are no attached processes. More...
|
| |
| int | et_station_attach (et_sys_id id, et_stat_id stat_id, et_att_id *att) |
| | This routine will attach the user to a station. More...
|
| |
| int | et_station_detach (et_sys_id id, et_att_id att) |
| | This routine will detach the user from a station. More...
|
| |
| int | et_station_setposition (et_sys_id id, et_stat_id stat_id, int position, int parallelposition) |
| | This routine sets a station's position in the linked list of active and idle stations and its position within a group of parallel stations if it is one. More...
|
| |
| int | et_station_getposition (et_sys_id id, et_stat_id stat_id, int *position, int *parallelposition) |
| | This routine gets a station's position in the linked list of active and idle stations and its position within a group of parallel stations if it is one. More...
|
| |
| int | et_station_config_init (et_statconfig *sconfig) |
| | This routine initializes a configuration used to create a station in the ET system. More...
|
| |
| int | et_station_config_destroy (et_statconfig sconfig) |
| | This routine frees the memory allocated when a configuration is initialized by et_station_config_init(). More...
|
| |
| int | et_station_config_setblock (et_statconfig sconfig, int val) |
| | This routine sets a station configuration's block mode. More...
|
| |
| int | et_station_config_getblock (et_statconfig sconfig, int *val) |
| | This routine gets a station configuration's block mode. More...
|
| |
| int | et_station_config_setflow (et_statconfig sconfig, int val) |
| | This routine sets a station configuration's flow mode. More...
|
| |
| int | et_station_config_getflow (et_statconfig sconfig, int *val) |
| | This routine gets a station configuration's flow mode. More...
|
| |
| int | et_station_config_setselect (et_statconfig sconfig, int val) |
| | This routine sets a station configuration's select mode which determines the algorithm this station uses to decide which events to let into its input list. More...
|
| |
| int | et_station_config_getselect (et_statconfig sconfig, int *val) |
| | This routine gets a station configuration's select mode. More...
|
| |
| int | et_station_config_setuser (et_statconfig sconfig, int val) |
| | This routine sets a station configuration's user mode which is the maximum number of users which may simultaneously attach to the station. More...
|
| |
| int | et_station_config_getuser (et_statconfig sconfig, int *val) |
| | This routine gets a station configuration's user mode. More...
|
| |
| int | et_station_config_setrestore (et_statconfig sconfig, int val) |
| | This routine sets a station configuration's restore mode which determines where events go when the attachment that owns those events detaches from the station. More...
|
| |
| int | et_station_config_getrestore (et_statconfig sconfig, int *val) |
| | This routine gets a station configuration's restore mode which determines where events go when the attachment who owns those events detaches from the station. More...
|
| |
| int | et_station_config_setcue (et_statconfig sconfig, int val) |
| | This routine sets a station configuration's queue size which is the max number of events allowed in the input list when the station is nonblocking. More...
|
| |
| int | et_station_config_getcue (et_statconfig sconfig, int *val) |
| | This routine gets a station configuration's queue size which is the max number of events allowed in the input list when the station is nonblocking. More...
|
| |
| int | et_station_config_setprescale (et_statconfig sconfig, int val) |
| | This routine sets a station configuration's prescale value. More...
|
| |
| int | et_station_config_getprescale (et_statconfig sconfig, int *val) |
| | This routine gets a station configuration's prescale value. More...
|
| |
| int | et_station_config_setselectwords (et_statconfig sconfig, int val[]) |
| | This routine sets a station configuration's array of selection integers. More...
|
| |
| int | et_station_config_getselectwords (et_statconfig sconfig, int val[]) |
| | This routine gets a station configuration's array of selection integers. More...
|
| |
| int | et_station_config_setfunction (et_statconfig sconfig, const char *val) |
| | This routine sets a station configuration's name of the user-defined function which is loaded from a shared library and used for selecting events. More...
|
| |
| int | et_station_config_getfunction (et_statconfig sconfig, char *val) |
| | This routine gets a station configuration's name of the user-defined function which is loaded from a shared library and used for selecting events (may be NULL). More...
|
| |
| int | et_station_config_setlib (et_statconfig sconfig, const char *val) |
| | This routine sets a station configuration's name of the shared library which is used for loading a user's function to select events. More...
|
| |
| int | et_station_config_getlib (et_statconfig sconfig, char *val) |
| | This routine gets a station configuration's name of the shared library which is used for loading a user's function to select events (may be NULL). More...
|
| |
| int | et_station_config_setclass (et_statconfig sconfig, const char *val) |
| | This routine sets a station configuration's name of the Java class which is used for loading a user's function to select events. More...
|
| |
| int | et_station_config_getclass (et_statconfig sconfig, char *val) |
| | This routine gets a station configuration's name of the Java class which is used for loading a user's function to select events. More...
|
| |
| int | et_station_isattached (et_sys_id id, et_stat_id stat_id, et_att_id att) |
| | Is an attachment attached to a particular station? More...
|
| |
| int | et_station_exists (et_sys_id id, et_stat_id *stat_id, const char *stat_name) |
| | This routine tells whether a station exists or not, given the name of a station, If it does, it gives its id. More...
|
| |
| int | et_station_name_to_id (et_sys_id id, et_stat_id *stat_id, const char *stat_name) |
| | This routine gives a station id, given the name of a station,. More...
|
| |
| int | et_station_getattachments (et_sys_id id, et_stat_id stat_id, int *numatts) |
| | This routine gets the number of attachments to the given station. More...
|
| |
| int | et_station_getstatus (et_sys_id id, et_stat_id stat_id, int *status) |
| | This routine gets the status of a station which may be one of the following values. More...
|
| |
| int | et_station_getinputcount (et_sys_id id, et_stat_id stat_id, int *cnt) |
| | This routine gets the number of events in a station's input list. More...
|
| |
| int | et_station_getinputcount_rt (et_sys_id id, et_stat_id stat_id, int *cnt) |
| | This routine gets the number of events in a station's input list IN REALTIME. More...
|
| |
| int | et_station_getoutputcount (et_sys_id id, et_stat_id stat_id, int *cnt) |
| | This routine gets the number of events in a station's output list. More...
|
| |
| int | et_station_getselect (et_sys_id id, et_stat_id stat_id, int *select) |
| | This routine gets a station's select mode which determines the algorithm this station uses to decide which events to let into its input list. More...
|
| |
| int | et_station_getlib (et_sys_id id, et_stat_id stat_id, char *lib) |
| | This routine gets the name of the shared library containing an event selection function provided by the user. More...
|
| |
| int | et_station_getclass (et_sys_id id, et_stat_id stat_id, char *classs) |
| | This routine gets the Java class defining an event selection method provided by the user for Java-based ET systems. More...
|
| |
| int | et_station_getfunction (et_sys_id id, et_stat_id stat_id, char *function) |
| | This routine gets the name of the selection function in the shared library provided by the user. More...
|
| |
| int | et_station_getblock (et_sys_id id, et_stat_id stat_id, int *block) |
| | This routine gets the block mode of a station which may be ET_STATION_BLOCKING or ET_STATION_NONBLOCKING. More...
|
| |
| int | et_station_setblock (et_sys_id id, et_stat_id stat_id, int block) |
| | This routine sets a station's block mode. More...
|
| |
| int | et_station_getrestore (et_sys_id id, et_stat_id stat_id, int *restore) |
| | This routine gets a station's restore mode which determines where events go when the attachment that owns those events detaches from a station. More...
|
| |
| int | et_station_setrestore (et_sys_id id, et_stat_id stat_id, int restore) |
| | This routine sets a station's restore mode which determines where events go when the attachment that owns those events detaches from a station. More...
|
| |
| int | et_station_getuser (et_sys_id id, et_stat_id stat_id, int *user) |
| | This routine gets a station's user mode which is the maximum number of simultaneous attachments allowed with 0 meaning multiple. More...
|
| |
| int | et_station_setuser (et_sys_id id, et_stat_id stat_id, int user) |
| | This routine sets a station's user mode which is the maximum number of simultaneous attachments allowed to a station. More...
|
| |
| int | et_station_getprescale (et_sys_id id, et_stat_id stat_id, int *prescale) |
| | This routine gets a station's prescale value. More...
|
| |
| int | et_station_setprescale (et_sys_id id, et_stat_id stat_id, int prescale) |
| | This routine sets a station's prescale value. More...
|
| |
| int | et_station_getcue (et_sys_id id, et_stat_id stat_id, int *cue) |
| | This routine gets a station's queue size, the size of the input event list for nonblocking stations. More...
|
| |
| int | et_station_setcue (et_sys_id id, et_stat_id stat_id, int cue) |
| | This routine sets a station's queue size, the size of the input event list for nonblocking stations. More...
|
| |
| int | et_station_getselectwords (et_sys_id id, et_stat_id stat_id, int select[]) |
| | This routine gets a station's array of selection integers used to select events. More...
|
| |
| int | et_station_setselectwords (et_sys_id id, et_stat_id stat_id, int select[]) |
| | This routine sets a station's array of selection integers used to select events. More...
|
| |
| int | et_system_config_init (et_sysconfig *sconfig) |
| | This routine initializes a configuration used to define an ET system. More...
|
| |
| int | et_system_config_destroy (et_sysconfig sconfig) |
| | This routine frees the memory allocated when a system configuration is initialized by et_system_config_init. More...
|
| |
| int | et_system_config_setevents (et_sysconfig sconfig, int val) |
| | This routine sets the configuration's total number of events. More...
|
| |
| int | et_system_config_getevents (et_sysconfig sconfig, int *val) |
| | This routine gets the configuration's total number of events. More...
|
| |
| int | et_system_config_setsize (et_sysconfig sconfig, size_t val) |
| | This routine sets the configuration's event size in bytes. More...
|
| |
| int | et_system_config_getsize (et_sysconfig sconfig, size_t *val) |
| | This routine gets the configuration's event size in bytes. More...
|
| |
| int | et_system_config_settemps (et_sysconfig sconfig, int val) |
| | This routine sets the configuration's maximum number of temporary events. More...
|
| |
| int | et_system_config_gettemps (et_sysconfig sconfig, int *val) |
| | This routine gets the configuration's maximum number of temporary events. More...
|
| |
| int | et_system_config_setstations (et_sysconfig sconfig, int val) |
| | This routine sets the configuration's maximum number of stations that may be created (including GRAND_CENTRAL). More...
|
| |
| int | et_system_config_getstations (et_sysconfig sconfig, int *val) |
| | This routine gets the configuration's maximum number of stations that may be created (including GRAND_CENTRAL). More...
|
| |
| int | et_system_config_setprocs (et_sysconfig sconfig, int val) |
| | This routine sets the configuration's maximum number of processes that may be created. More...
|
| |
| int | et_system_config_getprocs (et_sysconfig sconfig, int *val) |
| | This routine gets the configuration's maximum number of processes that may be created. More...
|
| |
| int | et_system_config_setattachments (et_sysconfig sconfig, int val) |
| | This routine sets the configuration's maximum number of attachments that may be created. More...
|
| |
| int | et_system_config_getattachments (et_sysconfig sconfig, int *val) |
| | This routine gets the configuration's maximum number of attachments that may be created. More...
|
| |
| int | et_system_config_setgroups (et_sysconfig sconfig, int groups[], int size) |
| | This routine sets the configuration's number of event groups and how many events are in each group. More...
|
| |
| int | et_system_config_setfile (et_sysconfig sconfig, const char *val) |
| | This routine sets the configuration's ET system file name. More...
|
| |
| int | et_system_config_getfile (et_sysconfig sconfig, char *val) |
| | This routine gets the configuration's ET system file name. More...
|
| |
| int | et_system_config_setport (et_sysconfig sconfig, int val) |
| | This routine sets the configuration's UDP listening port used by remote users trying to find the ET system by broad/multicasting. More...
|
| |
| int | et_system_config_getport (et_sysconfig sconfig, int *val) |
| | This routine gets the configuration's UDP listening port used by remote users trying to find the ET system by broad/multicasting. More...
|
| |
| int | et_system_config_setserverport (et_sysconfig sconfig, int val) |
| | This routine sets the configuration's TCP listening port number used to communicate with remote users. More...
|
| |
| int | et_system_config_getserverport (et_sysconfig sconfig, int *val) |
| | This routine gets the configuration's TCP listening port number used to communicate with remote users. More...
|
| |
| int | et_system_config_addmulticast (et_sysconfig sconfig, const char *val) |
| | This routine adds a multicast address to a list, each address of which the ET system is listening on for UDP packets from users trying to find it. More...
|
| |
| int | et_system_config_removemulticast (et_sysconfig sconfig, const char *val) |
| | This routine removes a multicast address from a list, so that the ET system no longer listens on it for UDP packets from users trying to find the system. More...
|
| |
| int | et_system_config_settcp (et_sysconfig sconfig, int rBufSize, int sBufSize, int noDelay) |
| | This routine sets the configuration's TCP socket options used when communicating with remote users over sockets. More...
|
| |
| int | et_system_config_gettcp (et_sysconfig sconfig, int *rBufSize, int *sBufSize, int *noDelay) |
| | This routine gets the configuration's TCP socket options used when communicating with remote users over sockets. More...
|
| |
| int | et_system_setgroup (et_sys_id id, int group) |
| | This routine sets the default group number of the ET client. More...
|
| |
| int | et_system_getgroup (et_sys_id id, int *group) |
| | This routine gets the default group number of the ET client. More...
|
| |
| int | et_system_getgroupcount (et_sys_id id, int *grpCount) |
| | This routine gets the number of event groups in ET system. More...
|
| |
| int | et_system_setdebug (et_sys_id id, int debug) |
| | This routine sets the level of debug output for the ET client. More...
|
| |
| int | et_system_getdebug (et_sys_id id, int *debug) |
| | This routine gets the level of debug output for the ET client. More...
|
| |
| int | et_system_getlocality (et_sys_id id, int *locality) |
| | This routine gets the locality of the ET client. More...
|
| |
| int | et_system_getnumevents (et_sys_id id, int *numevents) |
| | This routine gets the number of events in the ET system. More...
|
| |
| int | et_system_geteventsize (et_sys_id id, size_t *eventsize) |
| | This routine gets the size of an event in bytes in the ET system. More...
|
| |
| int | et_system_gettempsmax (et_sys_id id, int *tempsmax) |
| | This routine gets the maximum number of temporary events allowed in the ET system. More...
|
| |
| int | et_system_getstationsmax (et_sys_id id, int *stationsmax) |
| | This routine gets the maximum number of stations allowed in the ET system. More...
|
| |
| int | et_system_getprocsmax (et_sys_id id, int *procsmax) |
| | This routine gets the maximum number of local processes that are allowed to open the ET system. More...
|
| |
| int | et_system_getattsmax (et_sys_id id, int *attsmax) |
| | This routine gets the maximum number of attachments that are allowed to be made to the ET system. More...
|
| |
| int | et_system_getheartbeat (et_sys_id id, int *heartbeat) |
| | This routine gets the current value of the heartbeat of the ET system. More...
|
| |
| int | et_system_getpid (et_sys_id id, pid_t *pid) |
| | This routine gets the unix process id of the ET system process. More...
|
| |
| int | et_system_getprocs (et_sys_id id, int *procs) |
| | This routine gets the number of local processes that have opened the ET system. More...
|
| |
| int | et_system_getattachments (et_sys_id id, int *atts) |
| | This routine gets the number of attachments that have been made to the ET system. More...
|
| |
| int | et_system_getstations (et_sys_id id, int *stations) |
| | This routine gets the number of stations in the ET system. More...
|
| |
| int | et_system_gettemps (et_sys_id id, int *temps) |
| | This routine gets the number of temporary events currently in the ET system. More...
|
| |
| int | et_system_getserverport (et_sys_id id, int *port) |
| | This routine gets the TCP listening port number of the ET system. More...
|
| |
| int | et_system_gethost (et_sys_id id, char *host) |
| | This routine gets the host of the ET system. More...
|
| |
| int | et_system_getlocaladdress (et_sys_id id, char *address) |
| | This routine gets the local IP address, if any, used to connect remotely to the ET system. More...
|
| |
| int | et_open_config_init (et_openconfig *sconfig) |
| | This routine initializes a configuration used to open an ET system. More...
|
| |
| int | et_open_config_destroy (et_openconfig sconfig) |
| | This routine frees the memory allocated when an open configuration is initialized by et_open_config_init. More...
|
| |
| int | et_open_config_setwait (et_openconfig sconfig, int val) |
| | This routine sets the means to wait for a valid ET system to be detected. More...
|
| |
| int | et_open_config_getwait (et_openconfig sconfig, int *val) |
| | This routine gets the means being used to wait for a valid ET system to be detected. More...
|
| |
| int | et_open_config_setcast (et_openconfig sconfig, int val) |
| | This routine sets the method for a remote user to discover the ET system. More...
|
| |
| int | et_open_config_getcast (et_openconfig sconfig, int *val) |
| | This routine gets the method for a remote user to discover the ET system. More...
|
| |
| int | et_open_config_setTTL (et_openconfig sconfig, int val) |
| | This routine sets the "ttl" value for multicasting. More...
|
| |
| int | et_open_config_getTTL (et_openconfig sconfig, int *val) |
| | This routine gets the "ttl" value for multicasting. More...
|
| |
| int | et_open_config_setmode (et_openconfig sconfig, int val) |
| | This routine sets whether the ET system treats the user running this routine as local (if it is local) or remote even if it is local. More...
|
| |
| int | et_open_config_getmode (et_openconfig sconfig, int *val) |
| | This routine gets whether the ET system treats the user running this routine as local (if it is local) or remote even if it is local. More...
|
| |
| int | et_open_config_setdebugdefault (et_openconfig sconfig, int val) |
| | This routine sets the default level of debug output. More...
|
| |
| int | et_open_config_getdebugdefault (et_openconfig sconfig, int *val) |
| | This routine gets the default level of debug output. More...
|
| |
| int | et_open_config_setport (et_openconfig sconfig, int val) |
| | This routine sets the port number for the UDP broad/multicasting used to discover the ET system. More...
|
| |
| int | et_open_config_getport (et_openconfig sconfig, int *val) |
| | This routine gets the port number for the UDP broad/multicasting used to discover the ET system. More...
|
| |
| int | et_open_config_setserverport (et_openconfig sconfig, int val) |
| | This routine sets the TCP port number for opening an ET system directly without broadcasting or multicasting. More...
|
| |
| int | et_open_config_getserverport (et_openconfig sconfig, int *val) |
| | This routine gets the TCP port number for opening an ET system directly without broadcasting or multicasting. More...
|
| |
| int | et_open_config_settimeout (et_openconfig sconfig, struct timespec val) |
| | This routine sets the maximum time to wait for a valid ET system to be detected. More...
|
| |
| int | et_open_config_gettimeout (et_openconfig sconfig, struct timespec *val) |
| | This routine gets the maximum time to wait for a valid ET system to be detected. More...
|
| |
| int | et_open_config_setaddress (et_openconfig sconfig, const char *val) |
| |
| int | et_open_config_getaddress (et_openconfig sconfig, char *val) |
| |
| int | et_open_config_sethost (et_openconfig sconfig, const char *val) |
| | This routine sets host or computer on which the ET system is running. More...
|
| |
| int | et_open_config_gethost (et_openconfig sconfig, char *val) |
| | This routine gets the host or computer on which the ET system is running. More...
|
| |
| int | et_open_config_addbroadcast (et_openconfig sconfig, const char *val) |
| | This routine adds an IP subnet broadcast address to a list of destinations used in broadcast discovery of the ET system. More...
|
| |
| int | et_open_config_removebroadcast (et_openconfig sconfig, const char *val) |
| | This routine removes an IP subnet broadcast address from a list of destinations used in broadcast discovery of the ET system. More...
|
| |
| int | et_open_config_addmulticast (et_openconfig sconfig, const char *val) |
| | This routine adds an IP multicast address to a list of destinations used in multicast discovery of the ET system. More...
|
| |
| int | et_open_config_removemulticast (et_openconfig sconfig, const char *val) |
| | This routine removes a multicast address from a list of destinations used in multicast discovery of the ET system. More...
|
| |
| int | et_open_config_setpolicy (et_openconfig sconfig, int val) |
| | This routine sets the return policy from calls to et_open. More...
|
| |
| int | et_open_config_getpolicy (et_openconfig sconfig, int *val) |
| | This routine gets the return policy from calls to et_open. More...
|
| |
| int | et_open_config_setinterface (et_openconfig sconfig, const char *val) |
| | This routine sets the network interface to use when communicating over the network with the ET system. More...
|
| |
| int | et_open_config_getinterface (et_openconfig sconfig, char *val) |
| | This routine gets the network interface being used to communicate over the network with the ET system. More...
|
| |
| int | et_open_config_settcp (et_openconfig sconfig, int rBufSize, int sBufSize, int noDelay) |
| | This routine sets the parameters of any TCP connection to the ET system. More...
|
| |
| int | et_open_config_gettcp (et_openconfig sconfig, int *rBufSize, int *sBufSize, int *noDelay) |
| | This routine gets the parameters of any TCP connection to the ET system. More...
|
| |
| int | et_bridge_config_init (et_bridgeconfig *config) |
| | This routine initializes a configuration used to establish a bridge between 2 ET systems. More...
|
| |
| int | et_bridge_config_destroy (et_bridgeconfig sconfig) |
| | This routine frees the memory allocated when a bridge configuration is initialized by et_bridge_config_init. More...
|
| |
| int | et_bridge_config_setmodefrom (et_bridgeconfig config, int val) |
| | This routine sets the mode of getting events from the "from" ET system. More...
|
| |
| int | et_bridge_config_getmodefrom (et_bridgeconfig config, int *val) |
| | This routine gets the mode of getting events from the "from" ET system. More...
|
| |
| int | et_bridge_config_setmodeto (et_bridgeconfig config, int val) |
| | This routine sets the mode of getting new events from the "to" ET system. More...
|
| |
| int | et_bridge_config_getmodeto (et_bridgeconfig config, int *val) |
| | This routine gets the mode of getting new events from the "to" ET system. More...
|
| |
| int | et_bridge_config_setchunkfrom (et_bridgeconfig config, int val) |
| | This routine sets the maximum number of events to get from the "from" ET system in a single call to et_events_get - the number of events to get in one chunk. More...
|
| |
| int | et_bridge_config_getchunkfrom (et_bridgeconfig config, int *val) |
| | This routine gets the maximum number of events to get from the "from" ET system in a single call to et_events_get - the number of events to get in one chunk. More...
|
| |
| int | et_bridge_config_setchunkto (et_bridgeconfig config, int val) |
| | This routine sets the maximum number of new events to get from the "to" ET system in a single call to et_events_new - the number of events to get in one chunk. More...
|
| |
| int | et_bridge_config_getchunkto (et_bridgeconfig config, int *val) |
| | This routine gets the maximum number of new events to get from the "to" ET system in a single call to et_events_new - the number of events to get in one chunk. More...
|
| |
| int | et_bridge_config_settimeoutfrom (et_bridgeconfig config, struct timespec val) |
| | This routine sets the time to wait for the "from" ET system during all et_events_get calls when the mode is set to ET_TIMED. More...
|
| |
| int | et_bridge_config_gettimeoutfrom (et_bridgeconfig config, struct timespec *val) |
| | This routine gets the time to wait for the "from" ET system during all et_events_get calls when the mode is set to ET_TIMED. More...
|
| |
| int | et_bridge_config_settimeoutto (et_bridgeconfig config, struct timespec val) |
| | This routine sets the time to wait for the "to" ET system during all et_events_new calls when the mode is set to ET_TIMED. More...
|
| |
| int | et_bridge_config_gettimeoutto (et_bridgeconfig config, struct timespec *val) |
| | This routine gets the time to wait for the "to" ET system during all et_events_new calls when the mode is set to ET_TIMED. More...
|
| |
| int | et_bridge_config_setfunc (et_bridgeconfig config, ET_SWAP_FUNCPTR func) |
| | This routine sets the function used to automatically swap data from one endian to another when bridging events between two ET systems. More...
|
| |
| int | et_events_bridge (et_sys_id id_from, et_sys_id id_to, et_att_id att_from, et_att_id att_to, et_bridgeconfig bconfig, int num, int *ntransferred) |
| | This routine transfers events between two ET systems in which events are copied from the "from" ET system and placed into the "to" ET system. More...
|
| |
1.9.1